Skip to content
LessonPrint

Keeping the Test Fair is a free printable Grade 3 to Grade 5 science worksheet on planning fair tests with variables controlled, aligned to Common Core standard 3-5-ETS1-3. It prints 8 questions with an answer key on its own sheet of paper, in 25 versions that each ask different questions, so no two pupils in the class work from the same page. Print it from the browser or download it as a PDF — no account, no email.

Set 13 of 25 · the same problems every time you open this link.

Next setLesson plan

One paper per pupil

12345678910111213141516171819202122232425

Set 1 has all 25 in a single PDF. All 25 sets ask different questions.

Keeping the Test Fair

3-5-ETS1-3

NameDate

Circle the best answer.

1.What is a failure point?
  • A.The part that gives way first under test
  • B.A design nobody liked
  • C.A test that was not done
2.In a slope test, what is the variable you change?
  • A.The cover on the slope
  • B.The amount of water
  • C.The angle of the slope
3.Why record what you controlled as well as what you changed?
  • A.To fill the page
  • B.It is not necessary
  • C.So somebody else can judge whether the test was fair
4.You change two things and the result improves. What is the problem?
  • A.Two changes are always better
  • B.Nothing, it improved
  • C.You cannot tell which change helped
5.You test two windbreaks. What must be the same for both?
  • A.Nothing at all
  • B.The wind, the place and how you measure the damage
  • C.The colour of each
6.Your model bridge fails at the same joint every time. What does that tell you?
  • A.Bridges cannot be improved
  • B.That joint is the failure point to improve
  • C.The whole design is fine
7.A pupil tests one design outdoors and one indoors. What is wrong?
  • A.The conditions differ, so the results cannot be compared
  • B.Nothing, both were tested
  • C.Indoors is always better
8.Why run each test more than once?
  • A.One result might be unusual
  • B.To make the sheet longer
  • C.To use more time

LessonPrint · 3-5-ETS1-3 · Set 13 · free to copy for classroom use

Answer key — Keeping the Test Fair

Set 13. Prints on its own sheet.

  1. 1.The part that gives way first under test
  2. 2.The cover on the slope
  3. 3.So somebody else can judge whether the test was fair
  4. 4.You cannot tell which change helped
  5. 5.The wind, the place and how you measure the damage
  6. 6.That joint is the failure point to improve
  7. 7.The conditions differ, so the results cannot be compared
  8. 8.One result might be unusual

More practice for 3-5-ETS1-3

Run fair tests, controlling the variables, to find what to improve.

Teaching this next? Keeping the Test Fair is the 55-minute plan for it, with the misconceptions to expect.

All Grade 3 to Grade 5 worksheets

Last reviewed 2026-09-05. Aligned to 3-5-ETS1-3 of the Next Generation Science Standards.