Home / Science / Printables / Grade 3 to Grade 5 / Keeping the Test Fair Keeping the Test Fair is a free printable Grade 3 to Grade 5 science worksheet on planning fair tests with variables controlled, aligned to Common Core standard 3-5-ETS1-3. It prints 8 questions with an answer key on its own sheet of paper, in 25 versions that each ask different questions, so no two pupils in the class work from the same page. Print it from the browser or download it as a PDF — no account, no email.
One paper per pupil
Set 1 has all 25 in a single PDF. All 25 sets ask different questions.
Keeping the Test Fair 3-5-ETS1-3
Name Date
Circle the best answer.
1. In a slope test, what is the variable you change?
A. The angle of the slope B. The amount of water C. The cover on the slope 2. You change two things and the result improves. What is the problem?
A. Nothing, it improved B. You cannot tell which change helped C. Two changes are always better 3. You test two windbreaks. What must be the same for both?
A. Nothing at all B. The wind, the place and how you measure the damage C. The colour of each 4. Why record what you controlled as well as what you changed?
A. So somebody else can judge whether the test was fair B. It is not necessary C. To fill the page 5. A pupil tests one design outdoors and one indoors. What is wrong?
A. Nothing, both were tested B. Indoors is always better C. The conditions differ, so the results cannot be compared 6. What is a failure point?
A. A design nobody liked B. A test that was not done C. The part that gives way first under test 7. Why run each test more than once?
A. To use more time B. To make the sheet longer C. One result might be unusual 8. Your model bridge fails at the same joint every time. What does that tell you?
A. Bridges cannot be improved B. The whole design is fine C. That joint is the failure point to improve LessonPrint · 3-5-ETS1-3 · Set 14 · free to copy for classroom use
Answer key — Keeping the Test Fair Set 14. Prints on its own sheet.
1. The cover on the slope 2. You cannot tell which change helped 3. The wind, the place and how you measure the damage 4. So somebody else can judge whether the test was fair 5. The conditions differ, so the results cannot be compared 6. The part that gives way first under test 7. One result might be unusual 8. That joint is the failure point to improve Last reviewed 2026-09-05. Aligned to 3-5-ETS1-3 of the Next Generation Science Standards.