Skip to content
LessonPrint

Keeping the Test Fair is a free printable Grade 3 to Grade 5 science worksheet on planning fair tests with variables controlled, aligned to Common Core standard 3-5-ETS1-3. It prints 8 questions with an answer key on its own sheet of paper, in 25 versions that each ask different questions, so no two pupils in the class work from the same page. Print it from the browser or download it as a PDF — no account, no email.

Set 19 of 25 · the same problems every time you open this link.

Next setLesson plan

One paper per pupil

12345678910111213141516171819202122232425

Set 1 has all 25 in a single PDF. All 25 sets ask different questions.

Keeping the Test Fair

3-5-ETS1-3

NameDate

Circle the best answer.

1.A pupil tests one design outdoors and one indoors. What is wrong?
  • A.The conditions differ, so the results cannot be compared
  • B.Indoors is always better
  • C.Nothing, both were tested
2.You test two windbreaks. What must be the same for both?
  • A.The colour of each
  • B.The wind, the place and how you measure the damage
  • C.Nothing at all
3.What is a failure point?
  • A.A design nobody liked
  • B.A test that was not done
  • C.The part that gives way first under test
4.Why record what you controlled as well as what you changed?
  • A.It is not necessary
  • B.So somebody else can judge whether the test was fair
  • C.To fill the page
5.Why run each test more than once?
  • A.To use more time
  • B.To make the sheet longer
  • C.One result might be unusual
6.In a slope test, what is the variable you change?
  • A.The cover on the slope
  • B.The amount of water
  • C.The angle of the slope
7.You change two things and the result improves. What is the problem?
  • A.Two changes are always better
  • B.Nothing, it improved
  • C.You cannot tell which change helped
8.Your model bridge fails at the same joint every time. What does that tell you?
  • A.That joint is the failure point to improve
  • B.The whole design is fine
  • C.Bridges cannot be improved

LessonPrint · 3-5-ETS1-3 · Set 19 · free to copy for classroom use

Answer key — Keeping the Test Fair

Set 19. Prints on its own sheet.

  1. 1.The conditions differ, so the results cannot be compared
  2. 2.The wind, the place and how you measure the damage
  3. 3.The part that gives way first under test
  4. 4.So somebody else can judge whether the test was fair
  5. 5.One result might be unusual
  6. 6.The cover on the slope
  7. 7.You cannot tell which change helped
  8. 8.That joint is the failure point to improve

More practice for 3-5-ETS1-3

Run fair tests, controlling the variables, to find what to improve.

Teaching this next? Keeping the Test Fair is the 55-minute plan for it, with the misconceptions to expect.

All Grade 3 to Grade 5 worksheets

Last reviewed 2026-09-05. Aligned to 3-5-ETS1-3 of the Next Generation Science Standards.