Home / Science / Printables / Grade 3 to Grade 5 / Keeping the Test Fair Keeping the Test Fair is a free printable Grade 3 to Grade 5 science worksheet on planning fair tests with variables controlled, aligned to Common Core standard 3-5-ETS1-3. It prints 8 questions with an answer key on its own sheet of paper, in 25 versions that each ask different questions, so no two pupils in the class work from the same page. Print it from the browser or download it as a PDF — no account, no email.
One paper per pupil
Set 1 has all 25 in a single PDF. All 25 sets ask different questions.
Keeping the Test Fair 3-5-ETS1-3
Name Date
Circle the best answer.
1. You change two things and the result improves. What is the problem?
A. You cannot tell which change helped B. Two changes are always better C. Nothing, it improved 2. In a slope test, what is the variable you change?
A. The amount of water B. The cover on the slope C. The angle of the slope 3. What is a failure point?
A. The part that gives way first under test B. A design nobody liked C. A test that was not done 4. A pupil tests one design outdoors and one indoors. What is wrong?
A. Indoors is always better B. The conditions differ, so the results cannot be compared C. Nothing, both were tested 5. Why run each test more than once?
A. One result might be unusual B. To use more time C. To make the sheet longer 6. Why record what you controlled as well as what you changed?
A. So somebody else can judge whether the test was fair B. To fill the page C. It is not necessary 7. Your model bridge fails at the same joint every time. What does that tell you?
A. That joint is the failure point to improve B. The whole design is fine C. Bridges cannot be improved 8. You test two windbreaks. What must be the same for both?
A. The colour of each B. Nothing at all C. The wind, the place and how you measure the damage LessonPrint · 3-5-ETS1-3 · Set 21 · free to copy for classroom use
Answer key — Keeping the Test Fair Set 21. Prints on its own sheet.
1. You cannot tell which change helped 2. The cover on the slope 3. The part that gives way first under test 4. The conditions differ, so the results cannot be compared 5. One result might be unusual 6. So somebody else can judge whether the test was fair 7. That joint is the failure point to improve 8. The wind, the place and how you measure the damage Last reviewed 2026-09-05. Aligned to 3-5-ETS1-3 of the Next Generation Science Standards.