Skip to content
LessonPrint

Keeping the Test Fair is a free printable Grade 3 to Grade 5 science worksheet on planning fair tests with variables controlled, aligned to Common Core standard 3-5-ETS1-3. It prints 8 questions with an answer key on its own sheet of paper, in 25 versions that each ask different questions, so no two pupils in the class work from the same page. Print it from the browser or download it as a PDF — no account, no email.

Set 5 of 25 · the same problems every time you open this link.

Next setLesson plan

One paper per pupil

12345678910111213141516171819202122232425

Set 1 has all 25 in a single PDF. All 25 sets ask different questions.

Keeping the Test Fair

3-5-ETS1-3

NameDate

Circle the best answer.

1.Your model bridge fails at the same joint every time. What does that tell you?
  • A.The whole design is fine
  • B.Bridges cannot be improved
  • C.That joint is the failure point to improve
2.You change two things and the result improves. What is the problem?
  • A.You cannot tell which change helped
  • B.Nothing, it improved
  • C.Two changes are always better
3.A pupil tests one design outdoors and one indoors. What is wrong?
  • A.Indoors is always better
  • B.Nothing, both were tested
  • C.The conditions differ, so the results cannot be compared
4.Why run each test more than once?
  • A.To make the sheet longer
  • B.To use more time
  • C.One result might be unusual
5.You test two windbreaks. What must be the same for both?
  • A.The wind, the place and how you measure the damage
  • B.The colour of each
  • C.Nothing at all
6.In a slope test, what is the variable you change?
  • A.The angle of the slope
  • B.The cover on the slope
  • C.The amount of water
7.What is a failure point?
  • A.The part that gives way first under test
  • B.A design nobody liked
  • C.A test that was not done
8.Why record what you controlled as well as what you changed?
  • A.So somebody else can judge whether the test was fair
  • B.It is not necessary
  • C.To fill the page

LessonPrint · 3-5-ETS1-3 · Set 5 · free to copy for classroom use

Answer key — Keeping the Test Fair

Set 5. Prints on its own sheet.

  1. 1.That joint is the failure point to improve
  2. 2.You cannot tell which change helped
  3. 3.The conditions differ, so the results cannot be compared
  4. 4.One result might be unusual
  5. 5.The wind, the place and how you measure the damage
  6. 6.The cover on the slope
  7. 7.The part that gives way first under test
  8. 8.So somebody else can judge whether the test was fair

More practice for 3-5-ETS1-3

Run fair tests, controlling the variables, to find what to improve.

Teaching this next? Keeping the Test Fair is the 55-minute plan for it, with the misconceptions to expect.

All Grade 3 to Grade 5 worksheets

Last reviewed 2026-09-05. Aligned to 3-5-ETS1-3 of the Next Generation Science Standards.